.....

RE Library Home

Search Library

Add This Library
To Your Web Site

Real Estate Forum

Advertise With Us

Submit Your Articles
To This Library

Library Site Map

DOE Study Confirms Wall Insulation Requirements Don’t Deliver Enough - 2/28/2005 - House Energy Efficiency Insulation

DOE Study Confirms Wall Insulation Requirements Don’t Deliver Enough Bang for the Buck

A Department of Energy (DOE) report released last week confirms that controversial changes in the International Energy Conservation Code (IECC) require increased insulation in wood-framed walls but, depending on climate, take between 40 to 90 years to pay for themselves in energy savings. NAHB opposes the increase in wall insulation requirements.

The changes, which were initiated by proprietary interests in late 2003 and approved last year, add at least $600 to the cost of an average new home while saving only about $15 a year in energy costs.

The modifications increase wall insulation requirements — or R-values — in all climate zones for all types of wood-framed construction.

“NAHB supports building codes that promote energy efficiency, but home buyers should not bear the burden for expensive new requirements that provide little benefit,” said NAHB President David Wilson. “Seven to ten years, the average time a new home buyer lives in his new home, is a more appropriate payback period for energy cost savings.”

 
The primary effect of the change, according to the DOE report, has been “instantly prohibiting products that would otherwise maintain market share interests and could be compliant within the original DOE RICC code change proposal if other energy efficiency measures within the building code exceed code requirements.”

Many insulation types, including sprayed cellulose and expanding foams, cannot achieve the prescribed ratings without going to more expensive two-by-six walls.

The modifications were made at the last minute during a hearing on a proposal by the Department of Energy to simplify compliance with the IECC; and the onerous insulation requirement was added by the International Code Council as part of a 2004 supplement to the IECC. The change was opposed by both NAHB and DOE.

Last year, NAHB and other groups asked DOE to conduct a cost-benefit analysis of the modifications because stakeholders did not have a chance to study them before they were adopted.

“We applaud the Department of Energy for conducting this important analysis and making their non-biased findings public, despite pressure from interest groups to change the results,” said Wilson.

NAHB is using DOE’s data to advocate reasonable, appropriate reforms during the current round of hearings by the International Code Council being held in Cincinnati from Feb. 22 to March 4.

“NAHB will continue its work to support appropriate code changes that promote energy efficiency and protect housing affordability,” said Wilson.

NAHB members should urge the International Energy Conservation Code Development Committee to vote in favor of NAHB’s code change to reinstate DOE’s original R-values for wood-framed walls. E-mail your message as soon as possible to the ICC’s energy committee staff liaison at JWoodward@iccsafe.org.


Related Articles:
U.S. Green Building Council Adds LEED Ratings For Existing Buildings | Vacuum Insulation Panel (VIP)
Johns Manville Introduces Spray-In, Fast-Dry, Insulation System | Home Insulation Basics - Higher R-Values = Higher Insulating Values
 

Article reprinted with permission Copyright ©. Article presentation format, categories, and content management system Copyright © Nemmar.com.

.....


Copyright © 1990-2007 All Rights Reserved - Terms and Conditions Our copyright is very strictly enforced!
Page copy protected against web site content infringement by Copyscape