High Efficiency Air Conditioners without HCFC  Concerns about the hole in the ozone layer have impacted many products we use, and air conditioners are no exception. Many air conditioning systems use a HCFC (hydrochlorofluorocarbon) refrigerant, a substance known to cause of depletion of the ozone layer. The EPA currently limits the amount of HCFC that may be produced, and intends to prohibit use of HCFCs by 2030.
The refrigerant R-410A is one of the substitutes currently accepted as a replacement for the commonly used HCFC-22 (also known as R-22). The new material is marketed under the trade names AZ-20, Suva 9100 and Puron. Air conditioners use a system of compressors, coils, fans, pipes and controls to remove heat from the home. A refrigerant is the medium used to transfer heat through this closed loop system. In the past, refrigerants like HCFCs containing chlorine were widely used because of their excellent heat transfer properties with respect to the refrigeration cycle. While air conditioners don't normally release chlorine gas, it can often escape into the atmosphere through a leak or during service of the unit. Because of the potential damage to the ozone layer, several countries have agreed to reduce and eventually eliminate the production of HCFCs. An air conditioner using R-410A has slightly different specifications than traditional cooling systems. Higher pressures are needed for the refrigerant to have the same cooling effect. This increased pressure requires design changes in the compressor and piping. An unfortunate consequence is that R-410A may not be substituted into existing systems. Efficiency of the new refrigerant is comparable with the older product. There are models currently available that have a SEER (Seasonal Energy Efficiency Ratio) of 18. 
 | R-410A refrigerant does not pose a threat to the ozone layer. |
Contractors may not be familiar with non-HCFC refrigerants or R-410A machines. It is essential that proper operating pressures are used during installation.
Air conditioners with R-410A refrigerant cost somewhat more than those with conventional refrigerant.
Operating cost for R-410A air conditioners will depend on the energy efficiency rating of the equipment.
By 2010, manufacturers will not be allowed to produce residential air conditioners that use R-22 refrigerant. Use of R-22 refrigerant will be permitted until the year 2030.
Asdal Builders: Henderson, Nevada
Installation is identical for R-410A since the change is internal. Service will be only slightly modified because of the higher operating pressure. Training for the new refrigerant should be minimal, and changes in service equipment, which might include gauges with a higher limit, should be minor.
Warranty will vary by manufacturer, with 10 year limited warranties typical.
R-410A is not harmful to the ozone layer. While systems with the new refrigerant cost more, the price of servicing the older units is expected to rise because of limits on availability of R-22. | 
