Paint Anything - How to paint (or stain) almost anything around your house Spring is here, and many people are starting to think about sprucing up their homes to get ready for the warmer weather. While a fresh coat of paint is one of the best ways to freshen up the walls in any room in your home, there are many other surfaces around the home that you may not have thought to paint, or if you did you may not have been entirely sure how to go about it. Some of these surfaces include concrete, brick, metal, aluminum and even plastic. So if you want to bedazzle your basement walls or make your worn-down aluminum siding a little more alluring - here are some tips on how to go about it.
 note: Keep in mind - the best results for painting anything are achieved with proper preparation and the selection of the appropriate high quality paint product.
CONCRETE
First, let's take a look at concrete which can be found in and around the home in driveways, walkways, basement walls and floors etc. There are two ways to treat concrete whether it is inside or outside your home - staining and painting. Choosing whether to stain or to paint your concrete would depend largely upon both the current state of the concrete (new or old and previously treated) as well as the look you want to achieve.
Staining
Similar to wood stain, concrete stain permeates the surface and provides a long-lasting, durable and decorative finish on interior and exterior concrete and masonry surfaces. The stain permeates the surface and actually bonds with concrete and masonry to form a tough shield that doesn't fade, peel or flake like paint. To extend the life of the stain, consider using a clear stain as a final coat. Stain is inherently more transparent than paint and therefore does not completely cover up the concrete. Paint offers complete coverage and would be considered "opaque". Concrete stains come in a variety of colors and can create a beautiful custom look to any walkway, patio or indoor floor.
H&C Shield Plus Concrete Stain
Price: $23.00 per gallon
Widely Available
For more information visit: www.hc-concrete.com
Painting
Again, the choice here would depend upon the look you want as well as the current state of the concrete. Painting is a good choice if you want to create a more solid look, cover over any imperfections in the concrete or are simply re-painting an already painted concrete surface. An ideal choice of paint for basements is one that offers a waterproof feature as well as mildew resistance. "WaterTite" for example is just such a paint and can be used both as a primer or can be tinted to a variety of pastel colors.
Zinsser's WaterTite Mold & Mildew Proof Water Proofing Paint
Price: $24.00
Widely Available
For more information visit: www.zinsser.com
Whether you choose to stain or paint your concrete, make sure the surface is free from dirt and grease, and it is completely dry.
METAL
When it's time to freshen up a metal handrail or fence, you must be vigilant to completely eliminate metal enemy #1 - RUST! There are a variety of products available that can help remove rust, but the most simple and effective way to do this is with an old-fashioned hand-held wire brush or a special wire brush attachment for your drill. Simply scrub the rust with the wire brush until it is completely gone and then wipe the metal down with mineral spirits. Once you have removed the rust, immediately apply a primer, ideally one that contains a rust inhibitor such as Krylon's "Rust Tough" and then apply a topcoat of high gloss enamel paint.
Krylon "Rust Tough" Primer
Priced: $6.50 per 12 oz can
Widely Available
For more information visit: www.krylon.com
Krylon "Rust Tough" Rust Preventative Enamel Paint
Price: $6.50 per 12 oz can
Widely Available
For more information visit: www.krylon.com
ALUMINUM
Many people are surprised to learn that re-painting their existing aluminum siding is not only quite easy but certainly more cost-effective than replacing with new siding. As with all surfaces, the most important step is preparation - in the case of aluminum siding that means completely removing a chalky substance that builds up on siding over time. This chalky substance is usually fairly easily removed with a standard cleaner or degreaser and then wiped dry. However, in some cases a little more scrubbing is required. In most cases aluminum siding does not require a primer, however, if the original coating is completely worn down to the metal, prime those areas with a thinned-down oil based primer. Once you have cleaned and primed where necessary, choose a high quality 100% acrylic latex exterior paint with a satin finish. Sherwin Williams "SuperPaint" is a perfect example of this type of paint, allowing for the expansion and contraction that occurs as weather conditions change. A satin finish best simulates the look of new aluminum siding.
Sherwin Williams "SuperPaint" Exterior Latex Paint - Satin Finish
Price: $30.00 per gallon
Available at Sherwin Williams Stores
For more information visit: www.sherwin-williams.com
PLASTIC
Painting plastic is now much more of an option due to a new product from Krylon called "Fusion" which adheres to plastic in a way no other consumer paint ever has. You can now extend the life of plastic chairs, lawn furniture, and children's toys and send less plastic to the landfills. When painting plastic it is important to consider the current state of the plastic. If it is brand new, the surface needs to be wiped down with paint remover so that the paint will adhere properly. If it is older, simply wiping it clean will suffice. Apply a thin coat of one of sixteen brilliant colors available, allow to dry for a very short time and then apply again. Applying multiple thin coats of this product will prevent runs and drips.
Krylon "Fusion"
Price: $4.50 per 12 oz can
Widely Available
For more information visit: www.krylon.com |
