­
Back To Category
0016 Low Slope Shingle Application - Roofing - Asphalt Shingles
 
0016 Low Slope Shingle Application - Roofing - Asphalt Shingles -

Image Text: Note: no eave protection required > subsequent shingles secured with a band of cement with a width equal to the shingle exposure + 2 inches > second course of shingles secured with a band of cement with a width equal to the shingle exposure + 4 inches > starter strip embedded in an 8 inch wide band of cement > cement to start within 1 inch to 2 inches from bottom of shingle > shingle exposure > Note: low slope shingles often have only two tabs per shingle and are 3 shingles thick (rather than the usual 2) over the entire roof

Powered by Phoca Gallery

ROOFING, Steep Roofing , General, Asphalt Shingles, Wood Shingles and Shakes, Slate , Clay, Concrete and Fiber Cement, Metal, Roll Roofing, Steep Roof Flashings, Valley Flashings, Chimney Flashings, Plumbing Stack Flashings, Roof/Wall Flashings, Hip and Ridge Flashings, Skylights, Solariums, Drip Edge Flashings, Dormer Flashing, Flat Roofing, General , Built-Up Roofing (Tar and Gravel), Modified Bitumen, Synthetic Rubber (Elastomeric, EPDM), Plastic Roofing (PVC, Thermoplastic), Roll Roofing, Flat Roof Flashings

­